Carton packaging Yuelong describes the requirements and precautions for regular maintenance of carton machinery and equipment. Carton machinery and equipment should be maintained regularly. Because carton manufacturers widely use carton machinery and equipment, carton machinery and equipment has developed rapidly in the market. Carton manufacturers' core tips: carton machinery and equipment should be maintained regularly. Due to the wide use of carton machinery and equipment by carton manufacturers, carton machinery and equipment have developed rapidly in the market. Carton manufacturers should regularly maintain carton machinery and equipment. Because carton manufacturers widely use carton machinery and equipment, carton machinery and equipment has developed rapidly in the market. The demand of carton manufacturers for carton machinery and equipment depends on the products produced by the enterprise, enterprise scale and economic strength.
[i] timing: according to the provisions of lubrication chart or card, regularly and regularly refuel, add oil, clean and change oil.
1) according to the equipment lubrication chart, check or add oil to each part according to the time interval of shift, day, week and month
2) before going to work every day, the equipment operator shall check the oil level of each oil tank, wipe the sliding guide rail surface, add lubricating oil, and check the empty vehicle operation before production to observe whether the working condition of the lubrication system is normal.
II) quality determination: determine the type and brand of oil for each lubrication point according to different requirements.
1) the oil shall be tested and analyzed before use, and the unqualified oil shall not be used.
2) all oil tanks and oil filling holes on the equipment shall be kept intact. If the cover is lost, it shall be repaired in time to prevent iron filings and dust from penetrating into the friction surface and oil tank.
3) the oil products specified in the lubrication card shall be used strictly. However, when the specified oil products are insufficient and need to be replaced or mixed, the system shall be implemented.
[III] quantitative: determine the oil consumption, oil addition, daily consumption and round-trip oil collection of each part.
1) the "consumption quota" shall be formulated for equipment oil, and the operator and lubricator shall use oil according to the "quota".
2) the enterprise, workshop, section, team and single equipment shall specify the maximum oil consumption index every month, quarter and year. If the index is exceeded, the reasons shall be found out in order to revise the quota and study the methods to overcome it.
[iv] fixed point: determine the lubrication points of each part of the equipment and mark them by color according to different lubrication requirements.
1) Lubricators and operators must be familiar with the lubrication parts and points of the equipment, and be able to use these lubrication and refueling devices skillfully and correctly.
2) the specified lubrication parts, lubrication points and refueling devices equipped with oil holes, oil cups, nozzles, oil pumps, oil tanks and other devices in various equipment belong to the fixed-point range.
[v] fixed person: according to the lubrication parts of the equipment, a special person shall be designated to be responsible for maintenance and lubrication.
1) electrical components on carton equipment, such as various drive motors, shall be cleaned and changed by electrician.
2) the operator shall be responsible for refueling and maintenance of lubrication points and all sliding guide rail surfaces that are oiled once or several times a day in each shift.
3) the oil tank, oil pool and oil replenishment, regular cleaning and oil change are the responsibility of the lubricator and the cooperation of the operator.
4) the operator shall be responsible for observing the oil storage capacity of oil tanks, working boxes, gear boxes, hydraulic boxes, oil pump boxes, etc. of various equipment, and shall be responsible for timely reporting to the lubricator if it is lower than the oil mark. The lubricator shall be responsible for adding, supplementing and implementing the regular oil change plan. The maintenance worker shall be responsible for the oil tank that can only be cleaned after disassembly, and the lubricator shall cooperate with the cleaning.
Guangzhou Yuelong Printing Co., Ltd. was established in August 2014. The company is located in building C, YinBai Industrial Park, No. 109, Yufeng Road, Datong village, Dongyong Town, Nansha District, Guangzhou. With a total investment of more than 20 million yuan and a plant area of more than 7000 square meters, the company specializes in printing and packaging. In recent years, the company has continuously increased the investment of funds and equipment. At present, the company has many Heidelberg ordinary printing machines, UV printing machines, silk screen printing machines, full-automatic laminating machines, full-automatic pit mounting machines, full-automatic paper mounting machines and full-automatic die-cutting machines, Automatic plastic film box saw blade machine, automatic bronzing machine, high-speed box gluing machine, etc
